# Influ2 vs ZenABM: Person-Level Ads or Company-Level LinkedIn ABM?

> Influ2 vs ZenABM compared on features, pricing and fit: ads to named people across several networks versus company-level engagement, stages and attribution from your LinkedIn ads.

Author: Emilia Korczynska
Published: 2026-11-18
Updated: 2026-11-18
Categories: Comparisons
Source: https://zenabm.com/blog/influ2-vs-zenabm

---

![Cover for the Influ2 vs ZenABM comparison, showing person-level ads versus company-level LinkedIn ABM across six decision points.](https://cdn.zenabm.com/media/influ2-vs-zenabm-cover-20261112-0027.png)

Influ2 vs ZenABM comes down to one question: do you want to advertise to named people or to whole companies? Influ2 is a person-based ABM platform: you upload named contacts, Influ2 runs ads to them across several networks and it reports by person. ZenABM reads [company-level engagement](/companies-engagements) from the LinkedIn ads you already run in your own Campaign Manager and reports by company.

We build ZenABM, so here is where I sit: I target accounts and filter by job title, because contact-level targeting got very expensive for us and the later-stage contact audiences were too small to run. I haven't run Influ2 myself, so I stick to what its docs, its reviewers and buyers on our calls say. By the end you can judge both against your budget, team and motion, including when to buy neither yet.

## Influ2 vs ZenABM: quick summary

- **The real difference is the unit you advertise to and measure.** It decides most of what follows. Influ2 works on named people, and one slot in its pricing is one unique person for one month. ZenABM works on whole companies reached by the LinkedIn ads you already run.
- **Choose Influ2 if the programme depends on named decision-makers.** It fits teams that must reach them across several channels and coordinate ads with sales outreach at contact level, in a 1:1 or 1:few motion.
- **Choose ZenABM if the motion is mainly LinkedIn.** It gives you first-party engagement insight and pipeline reporting at company level, with simpler setup.
- **Choose neither yet if you have no defined target accounts, no ad budget beyond the subscription or nobody to run the tool.** It means both only pay off once those three exist.
- **The yearly cost gap is large.** Influ2's Vendr median is $60,000 a year (range $34,500 to $104,100) on a 12-month prepaid term, before media and setup extras. ZenABM's Starter plan is $59 a month on annual billing, with no markup on your ad spend.
- **The thing reviews don't tell you is where Influ2's data stops.** It reports on the programmes it runs, and its documentation describes no way to bring in engagement from LinkedIn campaigns you run yourself.
- **What ZenABM does for you:** it matches LinkedIn ad impressions, clicks and engagements to the company behind them and shows each company with its engagement score, ABM stage, intents and CRM data on one row. You can try it free for 37 days.

Here are the six checks, with what Influ2 and ZenABM each offer on use case, budget, people, size, channel and strategy:

![Six criteria compared: Influ2 targets named people across channels, ZenABM shows company engagement from your LinkedIn ads](https://cdn.zenabm.com/media/influ2-vs-zenabm-post-summary-influ2-vs-zenabm.png)

And here is how the two compare on the basics, from main use case and price to contract terms:

| Dimension | Influ2 | ZenABM |
| Main use case | Person-based ads to named contacts, with contact-level reporting and sales alerts | Company-level engagement, stages and deal attribution from your own LinkedIn ads |
| Not built for | Reporting on LinkedIn campaigns you run yourself | Buying display or other channels, website personalisation or third-party intent data |
| Subscription price | Not published; Vendr median $60,000 a year, range $34,500 to $104,100 | From $59 a month (Starter, annual billing) |
| Campaign budget it needs | Not stated by Influ2: its terms say the fee covers access to the platform; third-party reviews say ad spend is billed separately. Ask whether media is in your quote | Your own LinkedIn ad spend, no markup |
| Setup time and people | Reviewers call setup complex with a learning curve; needs strong CRM data and internal alignment | Connecting LinkedIn takes about 2 minutes with 90 days of data backfilled; CRM sync about 10 minutes; no contact lists to maintain |
| Best company and team size | Mid-market and enterprise with dedicated ad ops | Small to mid-market LinkedIn advertisers (10 to 200 employees); enterprise teams and agencies use it too |
| Main channel | LinkedIn, Facebook, Instagram, Google, Bing and Amazon | LinkedIn |
| LinkedIn support | Runs ads on LinkedIn for you, through access you grant to your LinkedIn Page | Reads, builds and manages the campaigns in your own account |
| Display and programmatic | Multi-channel delivery (Google, Bing and Amazon among them) | Not offered |
| Best-fit ABM strategy | 1:1 and 1:few where the buying committee is known | One-to-few and one-to-many at account level, filtered by job title |
| CRM sync | Contact-level to Salesforce, HubSpot, Marketo, Dynamics and Eloqua | Company-level to HubSpot, Salesforce and Attio |
| AI and MCP | MCP server launched 20 Aug 2026 | MCP server with 129 tools and 45 expert skills, plus the in-app agent Zena |
| Contract and free trial | 12-month prepaid, auto-renewing term; no free trial | Monthly or annual billing; 37-day free trial, no credit card; free plan after the trial |
| G2 rating | [4.6/5 from 173 reviews](https://www.g2.com/products/influ2/reviews) | [5.0/5 from 6 reviews](https://www.g2.com/products/zenabm/reviews) |

## How to choose: six evaluation criteria

Before the tool-by-tool view, run six checks against your own situation. Each one ends in a verdict.

- **What problem are you solving?** Influ2 does the job of reaching named people with ads and giving reps contact-level context. ZenABM does the job of showing which companies engage with your LinkedIn ads and acting on it. The classic mistake is buying for the demo, not the job, so pick the job first.
- **Can you afford it and the campaigns it needs?** Vendr's Influ2 median is $60,000 a year on a prepaid 12-month term, plus media and setup items Vendr lists, while ZenABM starts at $59 a month. If the subscription eats the campaign budget you have nothing left to run ads, so size your budget first with the [ABM Budget Calculator](/free-tools/abm-budget-calculator). For tight budgets, ZenABM is the safer fit.
- **Do you have the people?** Reviewers flag Influ2 setup as complex, with a learning curve and a need for strong CRM data and internal alignment. ZenABM connects to LinkedIn and a CRM and shows data without contact-list upkeep, so a one-person team can run it, while Influ2 needs an owner.
- **Is it built for your size?** Influ2 suits mid-market and enterprise teams with dedicated ad ops. ZenABM suits small to mid-market LinkedIn advertisers with 10 to 200 employees, and enterprise teams and agencies use it too.
- **Is it built for your channel?** If most of your budget goes to LinkedIn, that points to ZenABM. If you need Google, Meta, Bing and Amazon from one programme, that points to Influ2.
- **Does it fit your ABM strategy?** Influ2 fits 1:1 and 1:few where the buying committee is known in advance. ZenABM fits one-to-few and one-to-many motions run at account level with job-title filtering.

The sixth check, strategy, is where the tools really split, and it is where my stance sits. First, each tool on its own.

## 1. ZenABM: best for company-level engagement and attribution from your own LinkedIn ads

We built ZenABM, so weigh this with that in mind. You keep running campaigns in your own Campaign Manager, and ZenABM matches the impressions, clicks and engagements to the company behind them through the LinkedIn Ads API and joins them to your CRM records. The trade-off is scope: it runs LinkedIn ads only.

ZenABM's Company engagements view shows every company engaging with your ads, with its engagement score, ABM stage and CRM data on one row, which Campaign Manager doesn't expose. Here is that view, with stage, score, impressions and clicks for each company:

![ZenABM companies insights table showing each account's impressions, clicks, engagement and spend](https://cdn.zenabm.com/assets/ZenABM-performance-companies-insights.gif)

### ZenABM features

The short version of what you get on top of that company view:

- **Account stages and intent.** You define ABM stages as rules over LinkedIn engagement and CRM data, and a theme on each ad set or campaign becomes an intent signal when a company engages.
- **Campaign building and an AI agent.** Zena is our in-app agent. The MCP server has 129 tools and 45 expert skills and works with Claude, ChatGPT and Cursor. Both read and write, and every change is confirmed before it goes live.
- **Budget protection.** Budget Savers keeps LinkedIn Audience Network and Audience Expansion off, and exclusions keep bad-fit companies, titles and industries out of your ads.
- **Pipeline proof.** Dashboards put spend next to influenced pipeline, ROAS and pipeline per dollar, and the deal view shows the touchpoints behind each deal.
- **Sync and agencies.** CRM sync, webhooks and a REST API move the data on, and an Agency plan covers multi-client work.

The deal attribution view is the one I'd show a sceptical CFO, because it lays the ad touchpoints behind each deal on one timeline:

![ZenABM deal view of an account timeline, with each campaign touch attributed to the deal](https://cdn.zenabm.com/assets/ZenABM-deal-by-campaign-attribution-1-1.gif)

### ZenABM pricing

[ZenABM's plans](/pricing) cost $59 (Starter), $159 (Growth), $399 (Pro) and $479 (Agency) a month on annual billing, or $69, $199, $499 and $599 billed monthly. Every plan has unlimited seats and no markup on ad spend, and the trial runs 37 days with no credit card, followed by a free plan. Zena chats per day depend on the plan (Starter 10, Growth 50, Pro and Agency unlimited), and the MCP server and REST API start at Growth. The current plans are on the [ZenABM pricing](/pricing) page.

### ZenABM pros

- G2 rating: [5.0/5 from 6 reviews](https://www.g2.com/products/zenabm/reviews).
- Company engagement from the LinkedIn ads you already run, with customisable stages and first-party intent.
- Deal attribution, Budget Savers, scoped exclusions, Zena and an MCP server in one product.
- Reviewers praise "understanding ABM beyond theory", as a Head of Revenue at a mid-market company put it: "What I like best about ZenABM is that they understand ABM beyond theory." ([G2 review](https://www.g2.com/products/zenabm/reviews))
- A VP of Marketing at a mid-market company wrote: "ZenABM allows me to quickly query my LinkedIn ad performance data with AI." ([G2 review](https://www.g2.com/products/zenabm/reviews))
- Other reviewer points: a clean, intuitive UI and a good API and MCP to build on.

### What to know before you choose ZenABM

- It runs LinkedIn ads only: no display buying, website personalisation or third-party intent data. It reads Google and Reddit touchpoints for attribution, not delivery.
- There is no per-account impression cap switch, because Campaign Manager has no per-account spend limit. You get a routine of capping audiences plus exclusions instead.
- Its G2 profile has 6 reviews and no Capterra reviews, so there is little review history to check.
- Reviewers' mild points: ABM takes time to compound, and one wished for a Pipedrive integration.

### Who should choose ZenABM?

Choose it if most of your ad budget goes to LinkedIn. It also suits you if you want to see which companies engage with the ads you already run. You get stages, intent and deal attribution without a five-figure contract. Skip it if you need person-level delivery on Google, Meta, Bing or Amazon from one programme.

## 2. Influ2: best for named-person ads across several channels

Influ2 is a person-based ABM platform. You upload a list of named contacts, Influ2 runs ads to them across LinkedIn, Facebook, Instagram, Google, Bing and Amazon, and it reports which person saw or clicked which ad. It was named a Challenger in the 2026 Gartner Magic Quadrant for Account-Based Marketing Platforms, published on 7 October 2026, in its first appearance in the report.

This is the view sales gets, with engagement per named contact:

![Influ2 contact-level engagement tracking dashboard](https://cdn.zenabm.com/media/influ2-contact-level-engagement-tracking-dashboard-5743.webp)

### Influ2 features

[Influ2](/blog/what-is-influ) targets mid-market to enterprise teams running 1:1 or 1:few ABM, where reaching specific buying-group members matters more than broad account reach. Its orchestration layer moves each contact to a rule-based next step based on their own engagement, and it pushes alerts to Slack, Teams, Outreach and Salesloft. Contact-level engagement is written to Salesforce, HubSpot, Marketo, Dynamics and Eloqua, so a rep sees which contact engaged with which campaign before reaching out.

Intent comes mainly from first-party ad engagement, with third-party keyword and site signals only in some packages. The Influ2 MCP, launched on 20 August 2026, lets an assistant such as Claude query programmes, people and content, make changes, and build and launch programmes end to end with preview and confirmation. Its Signals Center adds generative AI summaries, and I found no documented resident chat agent.

Katya Tarapovskaia shows the use case it fits: in [her ZenABM Bootcamp 2026 session](https://www.youtube.com/watch?v=s3nrCc_AZMs&t=1724s) she said she uses Influ2 for contact-level targeting, to track exactly who saw her ads and who clicked. She also said its CPC and CPM are very similar to LinkedIn's, only slightly different and not very expensive.

For revenue, Influ2 counts buying groups influenced and opportunities generated, progressed and won, but only for ads it served and with no multi-touch model:

![Influ2 revenue dashboard with pipeline metrics](https://cdn.zenabm.com/media/influ2-revenue-dashboard-with-pipeline-metrics-5760.webp)

### Influ2 pricing

Influ2 does not publish prices: G2 lists "Contact Us", everything sits behind a demo and a custom quote, and there is no free trial. Vendr shows a median of $60,000 a year with a range of $34,500 to $104,100 across 16 purchases, priced on slots. Per Influ2's Terms of Service, a slot is the opportunity to upload one prospect to target for one month. A software company head of product reported a quote of "around 20K".

The real cost for a year is the subscription plus the media, integration or setup fees, creative services and overage charges Vendr lists, none with an Influ2-published amount. The contract terms matter as much as the number:

- **Auto-renewal.** The 12-month term renews for the same term unless you give 30 days' notice.
- **No early termination and prepayment in full.** You pay for the year upfront and can't leave early.
- **Bank transfer fees.** They fall on the client.

A demand-gen agency co-founder told us contact-level tools such as Influ2 cost multiple thousands of dollars a month, which is why they were evaluating alternatives.

### Influ2 pros

- G2 rating: [4.6/5 from 173 reviews](https://www.g2.com/products/influ2/reviews).
- Reviewers praise responsive support (20 mentions), hyper-personalised person-level targeting (18) and an intuitive interface with smooth onboarding (17). G2 scores ease of setup 8.8 and ease of admin 9.1.
- Contact-level engagement synced to the CRM, plus delivery across several networks from one programme.
- A G2 reviewer on why contact-level appeals: "Influ2 has revolutionized our strategy by allowing us to hone in on exact decision-makers almost every time… the detailed contact-level intent data has empowered our engagement." ([G2 review](https://www.g2.com/products/influ2/reviews))
- Another goes for the sales view: "I love the highly targeted insights on prospects – I can see which links prospects have clicked and content they viewed." ([G2 review](https://www.g2.com/products/influ2/reviews))

### Influ2 cons

- Reviewers describe a limited reporting structure and say they want deeper attribution layers.
- The ad approval process is called confusing.
- Some reviewers find setup complex and time-consuming, with a learning curve and a need for strong CRM data and internal alignment.
- Reviewers note limited ad group capacity and poor match rates, and one calls the pricing "a bit on the higher side".
- Cost scales with the contacts you reach, which gets steep for large lists.
- It reports on the programmes it runs, so engagement from LinkedIn campaigns you run yourself stays in Campaign Manager. ZenABM reads those campaigns directly.

### Who should choose Influ2?

Choose it if the programme depends on named decision-makers across several channels, you run 1:1 or 1:few ABM with a known buying committee and you can fund a five-figure contract and a dedicated owner. Skip it if your ABM is company-level, mostly on LinkedIn, or your budget is mostly the licence.

## Named people or whole accounts: where the ads run, privacy and cost per account reached

Targeting named individuals does not beat targeting accounts by default, and the reason shows up in where the ads run, what happens to individual data and what each approach costs.

Here is how the two approaches differ on where the ads run, what is stored and how the cost scales:

|  | Named people (Influ2) | Whole accounts (ZenABM) |
| Where the ads run | Run by Influ2 on LinkedIn, Facebook, Instagram, Google, Bing and Amazon, to a list of named contacts | In your own Campaign Manager account |
| What is stored | Engagement per named individual, written to CRM contact records | Engagement per company and per job title |
| How the cost scales | One slot per person per month | Flat plan from $59 a month, plus your own ad spend |
| Reach limit | Named lists shrink at match, and LinkedIn needs 300 matched members | Every company your ads reach shows up |

### Where the ads actually run

Influ2 runs the ads to a list of named people for you. Its terms say the ad accounts on each network are in the client's name, and its help centre has you grant Influ2 access to your LinkedIn Page and Facebook page. It reports on the programmes it runs, so engagement from campaigns you run yourself in Campaign Manager does not appear in it.

ZenABM does the reverse. It reads the ads you already run in your own account, so every company those ads reach shows up, including companies you never listed.

There is a reach limit on the person side too. A demand-gen agency told us it uploaded about a thousand people to LinkedIn and about three hundred matched. LinkedIn needs 300 matched members before an audience can be used for targeting, so a list that shrinks at match is already near that minimum.

### What happens to individual data

Influ2 stores and reports engagement against a named individual and writes it into CRM contact records. ZenABM matches engagement to the company and, in the job titles view, to the role, not to a named person. Before you choose person-based ads I'd check how individual data is handled: where it is stored, how long it is kept and who can see it. Ask Influ2 those questions in the demo.

### What it costs to reach an account

Because a slot is one person for one month, a list of 500 named contacts means 500 slots, and cost scales with the number of people you target. If Katya is right that Influ2's click prices are close to LinkedIn's, the difference sits in how you are charged, not in the click price. So ask Influ2 for the cost per reached contact, not the cost per slot.

For an account-level reference point, in ZenABM's latest data pull (October 2026, 168 LinkedIn ad accounts) the median account paid $2.52 per click on Thought Leader Ads against $8.95 on single image ads, counting all clicks.

The case for person-level is real, and it is Influ2's own. Andrei Zinkevich cites Influ2 research that personalised air cover to contacts sales are targeting lifts pipeline conversion by 118%. It shows a 2.44% meeting booked rate at 1 click and 15+ impressions against 1.40% without ad exposure. That is a vendor's research, not a neutral test. Still, [Zinkevich](https://www.linkedin.com/posts/azinkevich_here-is-our-full-abm-stack-leadfeeder-activity-7491101994292633601-MEUs) takes it seriously: "If we'd have a bigger budget, the one tool I'd to stack is Influ2 to run ads on the contact level." Note the word stack: it sits on top of a budget, not instead of one.

Here is where I land. In ABM, anything one person does is one signal for the account score, and making a named person the unit of measurement narrows that signal. Contact-level targeting got very expensive for us, and later-stage contact audiences were too small to run, so we target accounts and use [job title engagement](/job-titles-insights) to check the right roles are reached. The one exception I'd honour is a very small buying committee, where person-level targeting may be the only way to reach them.

## Influ2 vs ZenABM: feature-by-feature comparison

With the split clear, here is capability by capability. I mark the best fit per category as the type of team each is built for, not as an overall verdict.

### Account-based marketing: company engagement, intent signals, account stages and buying committees

Influ2 reports engagement per named contact, with title and buying group, and its journey stages are contact-level, not account stages. On intent, both turn first-party ad engagement into signals synced to the CRM, but ZenABM uses only engagement with your own LinkedIn ads. ZenABM moves every account through the [account stages](/use-cases/account-scoring) you define, from ad engagement and CRM data, so the stage is computed rather than updated by hand. Neither has a predictive model: ZenABM scoring is rule-based and customisable, and Influ2 ranks by engagement.

| Capability | Influ2 | ZenABM |
| Company-level engagement | No: per named contact, and only for the programmes Influ2 runs | Yes: every engaging company with score, stage, intents and CRM data |
| Intent signals | Yes: first-party ad engagement; third-party only in some packages | Yes: first-party engagement with your own LinkedIn ads; third-party not offered |
| Account stages and scoring | Partial: contact-level stages; ranks by engagement | Yes: rule-based, customisable stages |
| Job title engagement | Yes: engagement shown per contact title | Yes: engagement grouped by job title, with exclusions |
| Predictive scoring | No | No |

**Best fit:** ZenABM for account-level work; Influ2 for named-contact detail.

### LinkedIn campaign management: building campaigns, budget control, bidding, exclusions and frequency

ZenABM builds and manages campaigns, ad sets and ads with AI and checks audience sizes before you commit. Influ2 documents no LinkedIn Audience Network or Audience Expansion controls and no per-account impression cap.

On exclusions, Influ2 targeting is an upload of named contacts, with no bulk exclusion by company, title or industry. ZenABM's [exclusions](/exclusions) cover companies, titles and industries. You can apply them team-wide or per campaign, ad set or ABM campaign, and they reach new campaigns too. LinkedIn allows up to 200 per ad set. [Budget Savers](/budget-savers) switches off LinkedIn Audience Network and Audience Expansion, both on by default in Campaign Manager, on every ad set you choose and re-checks hourly.

Impression capping is a routine, not a switch: capping audiences, one per company size band, plus exclusions, which sync to LinkedIn and refresh daily.

| Capability | Influ2 | ZenABM |
| Build and manage campaigns with AI | Yes: builds and launches programmes end to end through its MCP, with preview and confirmation | Yes: Zena or MCP builds campaigns, ad sets and ads in your account, confirmed before going live |
| Bidding | Not documented | Yes: reads LinkedIn's suggested bid; Zena changes bids after you confirm |
| Budget Savers | Not documented; bills by slot | Yes: Audience Network and Audience Expansion off, re-checked hourly |
| Exclusions | No bulk exclusion by company, title or industry | Yes: up to 200 per ad set, scoped team-wide or per campaign |
| Impression capping | None documented beyond slot billing | Partial: capping audiences plus exclusions; no per-account switch |

**Best fit:** ZenABM, for teams running their own LinkedIn campaigns.

### Display, programmatic and other channels

Influ2 delivers across LinkedIn, Facebook, Instagram, Google, Bing and Amazon from one programme. ZenABM doesn't buy display or personalise websites, and it reads Google Ads and Reddit Ads touchpoints for attribution only. If your plan needs person-level delivery beyond LinkedIn, ZenABM is the wrong tool.

| Capability | Influ2 | ZenABM |
| Multi-channel ad execution | Yes: LinkedIn, Facebook, Instagram, Google, Bing and Amazon | Not offered |
| Website personalisation | Not documented | Not offered |
| Third-party intent data | Partial: only in some packages | Not offered |

**Best fit:** Influ2, for programmes that must deliver ads beyond LinkedIn.

### Analytics and reporting: dashboards, campaign reporting and revenue attribution

Influ2's reporting counts opportunities for the ads it served. ZenABM's [dashboards](/dashboards) show ad spend next to influenced pipeline, ROAS and pipeline per dollar, plus a per-deal timeline of touchpoints before each deal opened and closed.

| Capability | Influ2 | ZenABM |
| Dashboards | Partial: buying groups influenced, opportunities generated, progressed and won | Yes: spend, influenced pipeline, ROAS and pipeline per dollar for any period |
| Deal and pipeline attribution | Not documented: counts opportunities, no per-deal timeline | Yes: per-deal touchpoint timeline |
| Multi-channel revenue attribution | Partial: no multi-touch model; ads it served only | Yes: LinkedIn, Google Ads, Reddit Ads, AI referrals and organic (non-LinkedIn via HubSpot) |

**Best fit:** ZenABM, for teams that want to prove pipeline from their own ads.

### AI: assistants, automated reports and MCP servers

Both have MCP servers, the connection that lets an AI assistant such as Claude work with your account. ZenABM's has 129 tools and 45 expert skills. It also has Zena, the in-app agent, and automated reports every week, month and quarter.

| Capability | Influ2 | ZenABM |
| MCP server | Yes: launched 20 Aug 2026; builds and launches programmes with preview and confirmation | Yes: 129 tools, 45 skills; reads and writes |
| In-app AI agent | No resident chat agent documented; generative AI summaries in Signals Center | Yes: Zena |
| Automated AI reports | Not documented | Yes: weekly, monthly and quarterly |

**Best fit:** a tie on MCP; ZenABM for the in-app agent and reports.

### Data sync: CRM sync, webhooks, API and workflows

Influ2 writes contact-level data to Salesforce, HubSpot, Marketo, Dynamics and Eloqua, which suits a sales team that wants to see the person. ZenABM writes company-level data through [CRM sync](/crm-sync) to HubSpot, Salesforce and Attio, and offers a REST API and webhooks (to Clay, n8n, Zapier, Make, Outreach, Salesloft or your own endpoint).

| Capability | Influ2 | ZenABM |
| CRM sync | Yes: contact-level to Salesforce, HubSpot, Marketo, Dynamics, Eloqua | Yes: company-level to HubSpot, Salesforce, Attio |
| API | Not documented | Yes: REST API |
| Webhooks | Not documented | Yes: individual or batch delivery |

**Best fit:** a tie, with a reason: Influ2 covers more CRMs at contact level; ZenABM covers API and webhooks.

### Agencies: multi-client workspaces and reporting

ZenABM has an Agency plan and an [Agency MCP server](/agency-mcp-server) that reaches every client workspace from one connection, so reporting doesn't mean one login per client. Influ2 documents no multi-client workspaces, and one agency co-founder told us per-client pricing was a poor fit.

| Capability | Influ2 | ZenABM |
| Multi-client workspaces | Not documented | Yes: Agency plan |
| Agency access to all clients | Not documented | Yes: Agency MCP server |

**Best fit:** ZenABM, for agencies.

### Support, contracts and sales process

G2 reviewers praise Influ2's responsive support (20 mentions), and ZenABM's 37-day trial needs no credit card, so you can test it before talking to anyone.

**Best fit:** Influ2 for hands-on support; ZenABM for trying before you commit.

## What does each tool do that the other doesn't?

Those tables show what each tool lacks. Here is what you give up by choosing the other one.

Here are the three things only Influ2 does and the three things only ZenABM does:

![What only Influ2 does (person-level delivery, sales-cadence orchestration, contact-level CRM writes) and what only ZenABM does (company engagement, spend next to pipeline, budget protection)](https://cdn.zenabm.com/media/influ2-vs-zenabm-what-only-each-tool-does-v2.png)

### What only Influ2 does

- **Person-level delivery across channels** from one programme.
- **Sales-cadence orchestration** by each buyer's interests, engagement and stage. Its research on this comes from Influ2 itself, not an independent test.
- **Contact-level CRM writes**, so a rep sees which contact engaged before reaching out.

### What only ZenABM does

- **Reads company engagement from the campaigns in your own Campaign Manager.**
- **Puts spend next to pipeline.** [Multi-channel revenue attribution](/multichannel-attribution) puts LinkedIn Ads, Google Ads, Reddit Ads, AI referrals and organic visits on one company timeline, so you can see which channels touched a deal.
- **Protects budget and acts for you.** Budget Savers, exclusions that apply to new campaigns and Zena, which makes changes only after you confirm.

## Influ2 vs ZenABM pricing: what you will actually pay

ZenABM costs far less at every level, and the gap is largest before ad spend starts.

|  | Influ2 | ZenABM |
| Plan or tier | Slot-based, one custom quote | Starter, Growth, Pro, Agency |
| Price | Not published ('Contact Us' on G2); Vendr median $60,000 a year | Annual billing: $59, $159, $399, $479 a month; monthly billing: $69, $199, $499, $599 |
| What's included | Software and slots; Vendr lists media, setup, creative services and overage as extra costs | Unlimited seats on all plans; no markup on ad spend |
| Limits | Cost scales with contacts targeted | Zena chats per day by plan; MCP server and REST API from Growth |
| Contract length | 12-month term, prepaid, auto-renews | Monthly or annual |
| Free trial | None | 37 days, no credit card; free plan after |

As a worked example, Pro on annual billing is $399 × 12 = $4,788 a year. Against Vendr's Influ2 median of $60,000, the subscription gap is $60,000 minus $4,788, or $55,212, before any ad spend. Before signing anything, run your own account list and targets through the ABM Budget Calculator to see what a slot-style contract would cost against your budget.

> Read related: [Influ2 for ABM: Features, Reviews, Feasibility, and Pricing](/blog/influ2-for-abm)

## What the reviews don't tell you about Influ2 and ZenABM

These gotchas show up after signing, and they sit outside both pro and con lists.

Here are the five gotchas and what to check for each before you sign:

| Gotcha | What to check |
| Your own LinkedIn campaigns don't show up in Influ2 | Whether you can report from two places |
| A prepaid 12-month term | Your match rate before you sign |
| It needs CRM data and alignment | Who owns setup and how clean your contact data is |
| Person-level audiences shrink late in the funnel | How many named contacts remain at later stages |
| Company matching can pick the wrong company | The match rate on your own account list |

**Your own LinkedIn campaigns don't show up.** If your team already runs LinkedIn campaigns, Influ2 reports only on the programmes it runs, so you'd report from two places.

**A prepaid term arrives before you know your match rate.** A contract that prepays 12 months and auto-renews can lock in a five-figure spend before you learn how many of your contacts match. As I said above, the agency that uploaded about a thousand people saw about three hundred matched on LinkedIn.

**It needs CRM data and alignment.** Reviewers describe Influ2 setup as time-consuming. That's an ops project, not an afternoon. An agency co-founder who compared Influ2 and Primer on price told us they would rather not pay for another tool.

**Person-level audiences shrink late in the funnel.** This is why we moved to accounts filtered by job title: the later the stage, the fewer named contacts remain.

**Company matching has its own trap.** Account-level tools, ours included, can match the wrong company when several share a name, so check the match rate on your own list. In ZenABM you can connect a company to its HubSpot or Salesforce ID by hand if the match is wrong. Ivan Falco [splits the ad layer](https://www.linkedin.com/posts/ivanfalco_we-do-abm-is-the-biggest-lie-in-b2b-marketing-activity-7506056950317572096-aMXZ) the same way: persona-level 1:1 ads sit under Influ2 and company-level 1:1 ads under Frontal AI.

## The verdict: Influ2 or ZenABM?

So which should you pick? It depends on whether you need named people, how much you can commit and where your ads run.

Here is which tool fits which situation, including when to buy neither yet:

| Your situation | Pick |
| Named decision-makers across several channels, a known buying committee, a five-figure budget and an owner | Influ2 |
| Mostly LinkedIn, and you want company engagement, stages and deal attribution | ZenABM |
| An agency or lean team that can't justify contact-level pricing | ZenABM |
| A very small buying committee that account targeting can't reach | Influ2 |
| No target accounts, no campaign budget beyond the subscription, or nobody to run the tool | Neither yet |

### Choose Influ2 if...

- The programme depends on reaching named decision-makers across several channels.
- You run 1:1 or 1:few ABM with a known buying committee.
- You can fund a five-figure annual contract and a dedicated owner.
- The buying committee is very small, because person-level targeting may be the only way to reach it.

### Choose ZenABM if...

- Your motion is mainly LinkedIn, and you want to see which companies engage with the ads you already run.
- You want stages, intent and deal attribution without a five-figure contract.
- You are an agency or a lean team that can't justify per-client contact-level pricing.
- You'd rather test first: the 37-day free trial needs no card. Its limit, stated once: it runs LinkedIn ads only, so multi-channel person-level delivery is outside what it does.

### Don't buy either yet if...

- You have no defined target accounts.
- You have no campaign budget beyond the subscription.
- Nobody owns the tool day to day.
- You still need to prove account-level engagement. Teams that need both can run ZenABM for the LinkedIn side and add person-level delivery later, and I wouldn't pay for a contact-level layer until account-level engagement is proven. Our [ZenABM alternatives guide](/blog/zenabm-alternatives) lists more options.

ABM is about whole accounts, so that is where I start. I wouldn't reject person-level targeting outright for tiny committees, but it isn't my default. Before any demo, write down the one job, the campaign budget and the person who will run it. If one of the three is blank, you're not ready to buy.

## How ZenABM helps with LinkedIn ABM at account level

If you choose accounts, here is how each step runs in ZenABM.

- [**See which companies engage](/companies-engagements):** Company engagements matches impressions, clicks and engagements to the company, with engagement score, stage, intents and CRM data on one row.

Here is the company table, with stage, intents, engagement score and impressions for each account:

![ZenABM company performance table showing impressions, clicks and cost per account for a selected timeframe](https://cdn.zenabm.com/assets/ZenABM-performance-companies-insights-e1757920361570.gif)

- [**Check who you reached](/job-titles-insights):** Job title engagement groups engagement by job title, so you can check whether your spend reached the buying committee and exclude titles that should never have been served.
- [**Score and stage accounts](/use-cases/account-scoring):** Account stages are rules over LinkedIn engagement and CRM data, and each account moves through the funnel automatically.
- [**Capture intent](/company-buyers-intent):** a theme on each ad set or campaign becomes an intent signal when the account engages. It syncs to your CRM or goes by [webhooks](/integrations/webhooks) to Clay or your sales tool.
- [**Build and manage campaigns](/create-linkedin-campaigns-with-ai):** describe a campaign in chat and [Zena](/zena) or the [MCP server](/mcp) builds the campaign, ad sets, targeting and ads, with each change confirmed before it goes live.

Here is Zena, the in-app assistant, with sample questions about LinkedIn ad performance:

![ZenABM's Zena AI chat assistant in the app, ready to answer LinkedIn Ads and ABM questions](https://cdn.zenabm.com/assets/zenabm-zena-typing-horizontal_1.gif)

- [**Protect budget](/budget-savers):** Budget Savers keeps LinkedIn Audience Network and Audience Expansion off, and Exclusions keeps bad-fit companies, titles and industries out of your ads.
- [**Prove pipeline](/dashboards):** Dashboards and the deal attribution dashboard show spend next to influenced pipeline, ROAS and pipeline per dollar, with the touchpoints behind each deal.

ZenABM starts at $59 a month on annual billing, with a 37-day free trial.

Pick the unit first, then the tool: if your ads mostly run on LinkedIn, accounts filtered by job title will tell you more per dollar than a list of names.

## FAQ

### What does Influ2 do?

Influ2 is a person-based ABM platform. You upload a list of named contacts, and Influ2 runs ads to them across LinkedIn, Facebook, Instagram, Google, Bing and Amazon. It reports which person saw or clicked which ad, moves each contact to a rule-based next step and writes contact-level engagement to your CRM and sales tools.

### How much does Influ2 cost compared with ZenABM?

Vendr shows an Influ2 median of $60,000 a year, with a range of $34,500 to $104,100, on a 12-month prepaid term, and there is no free trial. ZenABM starts at $59 a month on annual billing, with unlimited seats, no markup on ad spend and a 37-day free trial with no credit card.

### Does Influ2 run ads on LinkedIn?

Yes. Influ2 runs contact-level ads on LinkedIn, Facebook, Instagram, Google, Bing and Amazon for you, after you grant it access to your LinkedIn Page. It reports on the programmes it runs, so it doesn't show company engagement from campaigns you run yourself in Campaign Manager, which is where ZenABM works.

### Is person-based advertising better than account-based advertising?

Not as a default. ABM is about whole accounts, and one person's action is one signal for the account score. In our accounts, contact-level targeting got very expensive and later-stage contact audiences were too small to run. For very small buying committees, person-level targeting may be the only way to reach them.

### Can I use Influ2 and ZenABM together?

Yes. ZenABM can show which companies engage with your LinkedIn ads and push them to your CRM, while Influ2 serves person-level ads across other channels. Add the contact-level layer only after you have proven account-level engagement and can fund a five-figure annual contract, since the two tools measure different units.

### Does ZenABM have an MCP server like Influ2?

Yes, both have one. Influ2's launched on 20 August 2026 and lets assistants like Claude query programmes and people, and build and launch programmes with preview and confirmation. ZenABM's works with Claude, ChatGPT and Cursor, reads and writes, and sits alongside the in-app agent Zena and 45 expert skills.
